판매가 | 3120000 |
---|---|
할인판매가 | 3,120,000원 (3,120,000원 할인) |
할인금액 | 총 할인금액 원 (모바일할인금액 원) |
적립금 |
0원(0%) 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % |
제휴적립금 | |
배송방법 | 택배 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
상품 추가설명 번역정보 |
배송 | |
---|---|
수량 |
상품 정보 | 가격 | 삭제 |
---|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
4006ER Omni Microphone, Rear cable
4006ES Omni Microphone, Side cable
Ultra-compact recording mic for hanging applications
Full-bodied sound with minimal visual impact
Acoustic Modification Accessories
Legendary recording reference capsule
When small, lightweight and hardly visible microphones for top-quality recordings are required, the active cable design and clean, transparent sound of our ultra-compact 4006E makes them the perfect choice. They are particularly popular as A-B stereo or Decca Tree pairs in concert halls where clean looks may not be compromised by quality recordings.
The 4006E can be mounted, hung or concealed to create clean, transparent recordings. With the SM4000-C suspension mount, which is included in the package, the 4006E to be hung in its own integrated cable from the ceiling and create precise and repeatable positioning.
It is ideal in theatres, operas and concert halls or places of worship and for film applications, both in the studio and on location. These mics are also popular for ambience miking on soundstages, in sports stadiums and other environments where ambient sound needs to be recorded.
An optional selection of acoustic modification accessories, including nose cone and interchangeable protection grids, allows the 4006E to be acoustically transformed into different microphone versions, making it the most multifaceted mic in your collection and a tremendous value. By simply changing a grid, it is possible to gain several unique frequency responses and directional characteristics from a single mic. Furthermore, these grids and elements will not produce any phase shift, noise or distortion that would otherwise be introduced by an electrical filter.
With a length of only 3,5 cm, the low-key appearance of the 4006E goes well together with its modular nature, making it possible to quickly combine the capsule with another pre-amp or boom pole or choosing another capsule with the active cable.
At any time and with no tools necessary it is possible to transform the basic 4006E microphone into a new configuration by combining it with another DPA microphone capsule or preamp.
Directional pattern:
Omnidirectional
Principle of operation:
Pressure
Cartridge type:
Pre-polarized condenser
Frequency range:
10 Hz - 20 kHz
Frequency range, ± 2 dB:
20 Hz - 20 kHz
Sensitivity, nominal, ± 2 dB at 250 Hz:
40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted:
Typ. 15 dB(A) re. 20 μPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4:
Typ. 27 dB (max. 29 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):
Typ. 79 dB(A)
Total Harmonic Distortion (THD):
< 1 % up to 132 dB SPL peak
Dynamic range:
Typ. 117 dB
Max. SPL, peak before clipping:
132 dB
Output impedance:
100 Ω
Minimum load impedance:
2 kΩ
Cable drive capability:
100 m (328 ft)
Output balance principle:
Impedance balancing
Common Mode Rejection Ratio (CMRR):
> 40 dB
Power supply (for full specifications):
48 V Phantom power (± 4 V)
Current consumption:
3.5 mA
Connector:
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color:
Matte black
Weight:
114 g (4 oz)
Microphone diameter:
16 - 19 mm (0.6 - 0.75 in)
Capsule diameter:
16 mm (0.6 in)
Microphone length:
35 mm (1.38 in)
Output voltage, RMS:
2.2 V
Polarity:
+V at pin 2 for positive sound pressure
Temperature range:
-40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH):
Up to 90%
Matching tolerance:
± 0.5 dB
Phase deviation for kit:
< 5°
상품명 | DPA 4006E-S |
---|---|
판매가 | 3,120,000원 |
배송방법 | 택배 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |