Low distortion - Linear repsonse
Huge dynamic range
Accurate
Transparent sound
Due to its modular nature, the MMC4011 cardioid capsule can be combined with different lengths of podium boom poles ? 15, 30 or 45 cm (6, 12 or 18 in). If longer booms are needed for floor stands with visual elegance, our long booms at 75 or 120 cm (30 or 48 in) makes a high-quality stage voice or instrument mic together with our dedicated accessories.
For music instruments, the 4011 capsule is a reference standard for its low-distortion and linear approach in an unusual huge dynamic range. With our sleek floor stands it is also a joy for the stage designer.
For speech it’s all about the voice and no sound source is probably as recognizable as just that. The DPA 4011F has a natural response to speak and a noise rejecting quality. No equalization is needed to remove any microphone artifacts, with the 4011F the voice intelligibility is straight out of the mic.
Podium Booms
4011F15: Supercardioid Microphone, 15cm Boom
4011F30: Supercardioid Microphone, 30cm Boom
4011F45: Supercardioid Microphone, 45cm Boom
Floor Stand Booms
4011F75: Supercardioid Microphone, 75cm Boom
4011F120: Supercardioid Microphone, 120cm Boom
Floor Stand Booms
4011FCUS: Cardioid Microphone, with top gooseneck only: up to 120 cm (48 in) ± 5 mm
4011FCUS: Cardioid Microphone, with top&bottom gooseneck: up to 70 cm (28 in) ± 5 mm *
*) up to 120 cm (48 in) if mounted in Floor Stand swivel joint
Directional pattern:
Cardioid
Principle of operation:
Pressure gradient
Cartridge type:
Pre-polarized condenser
Frequency range:
20 Hz - 20 kHz
Frequency range, ± 2 dB, at 30 cm:
40 Hz - 20 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz:
10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted:
Typ. 18 dB(A) re. 20 μPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4:
Typ. 25 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):
Typ. 76 dB(A)
Total Harmonic Distortion (THD):
< 1 % up to 139 dB SPL peak
Dynamic range:
Typ. 121 dB
Max. SPL, peak before clipping:
144 dB
Output impedance:
100 Ω
Minimum load impedance:
2 kΩ
Cable drive capability:
100 m (328 ft)
Output balance principle:
Impedance balancing
Common Mode Rejection Ratio (CMRR):
> 40 dB
Power supply (for full specifications):
48 V Phantom power (± 4 V)
Current consumption:
3.5 mA
Connector:
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color:
Matte black
Weight:
-
Microphone diameter:
19 mm (0.75 in)
Capsule diameter:
19 mm (0.75 in)
Microphone length:
35 mm (1.38 in)
Output voltage, RMS:
2.2 V
Polarity:
+V at pin 2 for positive sound pressure
Temperature range:
-40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH):
Up to 90%
Matching tolerance:
± 1 dB
Phase deviation for kit:
< 10°