Low distortion - Linear repsonse

Huge dynamic range

Accurate

Transparent sound

Due to its modular nature, the MMC4011 cardioid capsule can be combined with different lengths of podium boom poles ? 15, 30 or 45 cm (6, 12 or 18 in). If longer booms are needed for floor stands with visual elegance, our long booms at 75 or 120 cm (30 or 48 in) makes a high-quality stage voice or instrument mic together with our dedicated accessories.

For music instruments, the 4011 capsule is a reference standard for its low-distortion and linear approach in an unusual huge dynamic range. With our sleek floor stands it is also a joy for the stage designer.

For speech it’s all about the voice and no sound source is probably as recognizable as just that. The DPA 4011F has a natural response to speak and a noise rejecting quality. No equalization is needed to remove any microphone artifacts, with the 4011F the voice intelligibility is straight out of the mic.

Podium Booms

4011F15: Supercardioid Microphone, 15cm Boom

4011F30: Supercardioid Microphone, 30cm Boom

4011F45: Supercardioid Microphone, 45cm Boom

Floor Stand Booms

4011F75: Supercardioid Microphone, 75cm Boom

4011F120: Supercardioid Microphone, 120cm Boom

Floor Stand Booms

4011FCUS: Cardioid Microphone, with top gooseneck only: up to 120 cm (48 in) ± 5 mm

4011FCUS: Cardioid Microphone, with top&bottom gooseneck: up to 70 cm (28 in) ± 5 mm *

*) up to 120 cm (48 in) if mounted in Floor Stand swivel joint

존재하지 않는 이미지입니다.

Directional pattern:

Cardioid

Principle of operation:

Pressure gradient

Cartridge type:

Pre-polarized condenser

Frequency range:

20 Hz - 20 kHz

Frequency range, ± 2 dB, at 30 cm:

40 Hz - 20 kHz

Sensitivity, nominal, ± 2 dB at 1 kHz:

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted:

Typ. 18 dB(A) re. 20 μPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4:

Typ. 25 dB

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):

Typ. 76 dB(A)

Total Harmonic Distortion (THD):

< 1 % up to 139 dB SPL peak

Dynamic range:

Typ. 121 dB

Max. SPL, peak before clipping:

144 dB

Output impedance:

100 Ω

Minimum load impedance:

2 kΩ

Cable drive capability:

100 m (328 ft)

Output balance principle:

Impedance balancing

Common Mode Rejection Ratio (CMRR):

> 40 dB

Power supply (for full specifications):

48 V Phantom power (± 4 V)

Current consumption:

3.5 mA

Connector:

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color:

Matte black

Weight:

-

Microphone diameter:

19 mm (0.75 in)

Capsule diameter:

19 mm (0.75 in)

Microphone length:

35 mm (1.38 in)

Output voltage, RMS:

2.2 V

Polarity:

+V at pin 2 for positive sound pressure

Temperature range:

-40 °C to 45 °C (-40 °F to 113 °F)

Relative Humidity (RH):

Up to 90%

Matching tolerance:

± 1 dB

Phase deviation for kit:

< 10°